Simpson Strong-Tie ZN25200SS (1/4" x 2") Zinc Nailon Stainless-Steel Pin-Drive Anchor (100 Pack)
Simpson Strong-Tie ZN25200SS Description
Zinc Nailon anchors are low-cost, mushroom head anchors designed for static load applications. They are easily installed by hammering the pin, which expands the anchor body for secure placement.
Simpson Strong-Tie ZN25200SS Includes
- (100) Zinc Nailon Pin-Drive Anchor
Simpson Strong-Tie ZN25200SS Features
- Low-cost mushroom head design
- Tamper-resistant pin and head configuration
- Made from 304 stainless steel for durability
Simpson Strong-Tie ZN25200SS Applications
- Ideal for use in concrete, CMU, and brick
- Suitable for static load applications
Simpson Strong-Tie ZN25200SS Installation Overview
- Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
- Position the fixture and insert the Nailon anchor.
- Tap with a hammer until flush with the fixture, then drive the pin until flush with the top of the head.
Simpson Strong-Tie ZN25200SS Specifications
| Material | 304 Stainless Steel |
| Diameter | 1/4" |
| Length | 2" |
| Drill Bit Size | 1/4" |
| Quantity | 100 |
NOTE: Not for use in overhead applications. Nailon anchors are not recommended for eccentric tension (prying) loads as capacity will be greatly reduced in such applications.
Original: $49.13
-70%$49.13
$14.74Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Simpson Strong-Tie ZN25200SS Description
Zinc Nailon anchors are low-cost, mushroom head anchors designed for static load applications. They are easily installed by hammering the pin, which expands the anchor body for secure placement.
Simpson Strong-Tie ZN25200SS Includes
- (100) Zinc Nailon Pin-Drive Anchor
Simpson Strong-Tie ZN25200SS Features
- Low-cost mushroom head design
- Tamper-resistant pin and head configuration
- Made from 304 stainless steel for durability
Simpson Strong-Tie ZN25200SS Applications
- Ideal for use in concrete, CMU, and brick
- Suitable for static load applications
Simpson Strong-Tie ZN25200SS Installation Overview
- Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
- Position the fixture and insert the Nailon anchor.
- Tap with a hammer until flush with the fixture, then drive the pin until flush with the top of the head.
Simpson Strong-Tie ZN25200SS Specifications
| Material | 304 Stainless Steel |
| Diameter | 1/4" |
| Length | 2" |
| Drill Bit Size | 1/4" |
| Quantity | 100 |
NOTE: Not for use in overhead applications. Nailon anchors are not recommended for eccentric tension (prying) loads as capacity will be greatly reduced in such applications.
