🚚 Free Worldwide Shipping on All Orders!Shop Now
Simpson Strong-Tie ZN25114SS (1/4" x 1-1/4") Zinc Nailon Pin-Drive Anchor Stainless Steel (100 Pack)
Simpson Strong-Tie ZN25114SS Description
The Zinc Nailon Pin-Drive Anchor is a low-cost, tamper-resistant anchor ideal for static load applications in concrete, CMU, and brick.
Simpson Strong-Tie ZN25114SS Includes
- (100) Zinc Nailon Pin-Drive Anchor
Simpson Strong-Tie ZN25114SS Features
- Tamper-resistant pin and head configuration
- Made from 304 stainless steel for durability
- Easy installation with a hammer
- Suitable for concrete, CMU, and brick applications
Simpson Strong-Tie ZN25114SS Applications
- Static load applications in concrete, CMU, and brick
- General anchoring in solid base materials
Simpson Strong-Tie ZN25114SS Installation Overview
- Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
- Position the fixture and insert the Nailon anchor.
- Tap with a hammer until flush with the fixture, then drive the pin until flush with the top of the head.
Simpson Strong-Tie ZN25114SS Specifications
| Material | 304 Stainless Steel |
| Diameter | 1/4 in. |
| Length | 1-1/4 in. |
| Drill Bit Size | 1/4 in. |
| Quantity | 100 |
NOTE: This product is not for use in overhead applications.
$35.98
Simpson Strong-Tie ZN25114SS (1/4" x 1-1/4") Zinc Nailon Pin-Drive Anchor Stainless Steel (100 Pack)—
$35.98
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Simpson Strong-Tie ZN25114SS Description
The Zinc Nailon Pin-Drive Anchor is a low-cost, tamper-resistant anchor ideal for static load applications in concrete, CMU, and brick.
Simpson Strong-Tie ZN25114SS Includes
- (100) Zinc Nailon Pin-Drive Anchor
Simpson Strong-Tie ZN25114SS Features
- Tamper-resistant pin and head configuration
- Made from 304 stainless steel for durability
- Easy installation with a hammer
- Suitable for concrete, CMU, and brick applications
Simpson Strong-Tie ZN25114SS Applications
- Static load applications in concrete, CMU, and brick
- General anchoring in solid base materials
Simpson Strong-Tie ZN25114SS Installation Overview
- Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
- Position the fixture and insert the Nailon anchor.
- Tap with a hammer until flush with the fixture, then drive the pin until flush with the top of the head.
Simpson Strong-Tie ZN25114SS Specifications
| Material | 304 Stainless Steel |
| Diameter | 1/4 in. |
| Length | 1-1/4 in. |
| Drill Bit Size | 1/4 in. |
| Quantity | 100 |
NOTE: This product is not for use in overhead applications.
